Chọn vị trí của bạn:

Quốc gia

KP1-HC single-axis positioner with counterbearing

The KP1-HC single-axis positioner with horizontal rotational axis consists of a drive and counterbearing with a hollow shaft. It is available with a payload capacity of 500, 750, 1,000, 1,500, 2,000 or 4,000 kilograms. Tool radii of 800 to 1,470 millimeters offer maximum possible flexibility in system design.


Advantages of the KP1-HC single-axis positioner:

  • Broad portfolio:
    Thanks to the wide range of tool radii, loading heights and payload capacities that are available, you can enjoy the greatest possible flexibility when designing your system.
  • Integrated hollow shaft:
    The hollow shaft integrated into the counterbearing can be used to route the energy and fluid supply lines in a highly space-efficient and convenient manner.
  • Infinite rotation:
    Thanks to its infinitely rotating design, the KP1-HC is optimally positioned and can be used without limitation in any axis orientation.
  • Low space requirements:
    Thanks to its compact design, the KP1-HC single-axis positioner can be easily integrated anywhere. Enjoy greater creative freedom in the planning process.
  • Flexible alignment:
    The length compensation of 5 mm integrated into the counterbearing enables compensation of tool carrier tolerances. 
  • Insulated face plate:
    The face plates are electrically insulated as standard. This simplifies the integration process and improves the longevity of the positioner, particularly in the case of arc welding.
  • High welding power:
    Weld with up to 1000 A with a duty cycle of 100%. 

Data and variants of the KP1-HC positioner:


KP1-HC500-2 KP1-HC750-2 KP1-HC1000-2 KP1-HC1500-2 KP1-HC2000 KP1-HC4000
Rated payload 500 kg 750 kg 1.000 kg 1.500 kg 2.000 kg 4.000 kg
Tool radius

800 mm
1000 mm
1200 mm
800 mm
1000 mm
1200 mm
800 mm
1000 mm
1200 mm
800 mm
1000 mm
1200 mm
970 mm
1.220 mm
1.470 mm

970 mm
1.220 mm      
1.470 mm

Insert height 840 mm
1040 mm
1240 mm
840 mm
1040 mm
1240 mm
840 mm
1040 mm
1240 mm
840 mm
1040 mm
1240 mm
1000 mm
1250 mm
1500 mm
1000 mm
1250 mm
1500 mm
Pose repeatability 0,009°
0,009°
0,009°
0,009°
<±0,08 mm
<±0,08 mm
Turning range with energy supply system +/-190° +/-190° +/-190° +/-190° +/-185° +/-185° 
Turning range without energy supply system infinite infinite infinite infinite infinite infinite
Turning time (180°/360°) 2,5 s / 4,2 s 2,6 s / 4,3 s 2,3 s / 3,9 s 2,5 s / 4,1 s 3,3 s / 5,8 s 3,8 s / 6,8 s
Optional: rated welding current
(100% duty cycle), infinitely rotating
500 A / 1.000 A  

500 A / 1.000 A  

500 A / 1.000 A  

500 A / 1.000 A  

500 A / 1.000 A  

500 A / 1.000 A  

Optional: rated welding current
(60% duty cycle), infinitely rotating
590 A / 1.180 A  

590 A / 1.180 A  

590 A / 1.180 A  

590 A / 1.180 A  

590 A / 1.180 A  

590 A / 1.180 A