Vous utilisez une ancienne version de navigateur d’Internet Explorer. Pour bénéficier d’une représentation optimale, veuillez actualiser votre navigateur.
KUKA BOLT: Smart conveyor for assembly buffering
Based on independent cart technology, the modular and linear KUKA BOLT transport system solves assembly buffering challenges – and features extraordinary flexibility.
Conveyance strategy is key
In any automotive body shop, transferring subassemblies accurately and efficiently from Point A to Point B is critical. But achieving optimal throughput is not just a matter of speed. It requires a conveyance strategy that can accommodate downtime in some systems without slowing production in others. “Manufacturing isn’t perfect,” said Kevin Laurence, director, KUKA advanced technology group. “You’re never going to have a part come in one dock and out another at the same rate. Too many things can go wrong.”
Achieve output goals despite potential roadblocks
Buffering zones address this challenge and enable plants to achieve output goals despite potential roadblocks. Based on accumulating conveyors, buffering zones allow one system to feed another at a steady rate – and store the output of a producing system if consumption slows or stops down the line. But in recent years, as body shops moved toward mixed-model assembly and began assuming production for more subsystems, conventional buffering often fell short. “These buffering systems simply grew beyond their original intent,” Laurence explained. “The system that was supposed to keep the plant running didn’t have the necessary agility – and was prone to downtime itself.”
KUKA BOLT relies on independent cart technology
To address the realities of the contemporary assembly plant, KUKA recently developed the KUKA BOLT buffering overhead linear transport system, which is in sharp contrast to conventional “over under” conveyance configurations. Unlike conventional buffering, which uses friction-based conveyance, the KUKA BOLT relies on independent cart technology from MagneMotion®, a Rockwell Automation company. The system features QuickStick® intelligent conveyors.
The Power of Embedded Intelligence
Comprised of a linear motor and built-in motor controller, the QuickStick system uses integrated position sensing to enable independent control of separate carriers on a loop-style track. Accelerations, decelerations, velocities and positions are programmable. “Linear motor technology makes the KUKA BOLT a very smart system,” Laurence said. Since position sensors are embedded into the motor, you know exactly where each carrier and each part is at all times.
KUKA BOLT is bidirectional
Conversely, conventional conveyors rely on external proximity sensors to monitor pallet movement on the belt, but are unable to control or track individual payloads. And while conventional conveyors run in one direction only, the KUKA BOLT is bidirectional. “Bidirectional functionality is particularly helpful when producing and consuming systems get out of sync,” Laurence said.
Because the intelligent system always knows where all parts are, it can automatically and independently transport the proper model as needed.
The KUKA BOLT is also an efficient solution that eases proper sequencing in multi-model plants. To help achieve the correct part sequence for each vehicle, many plants establish selectivity banks, with separate conveyance systems transporting the parts for each model.
An assembly plant can replace selectivity banks and separate conveyors with a single KUKA BOLT system, thanks to its exceptional tracking ability.
Fewer Components. Easier Maintenance.
Featuring a modular design, the KUKA BOLT system is also built for easy maintainability. “Essentially, there are very few things that can go wrong on a KUKA BOLT system, because there are so few components,” Laurence said.
The KUKA BOLT includes an
extruded aluminum track,
solid-state QuickStick linear motor technology,
zero-maintenance carriers – plus
roller cluster wheel assemblies.
“The health status of the linear motors is independently monitored for power draw changes to enable predictive maintenance,” Laurence said. “In the rare instance a motor must be exchanged, the KUKA BOLT delivers alerts through the control system.” And if a roller cluster or wheel needs repair, the system pinpoints exactly which carrier is having the issue. In contrast to friction-based systems, repairable components are easily accessible from outside the track.
Poised for the Future
Perhaps the real beauty of the KUKA BOLT is its adaptability to a wide range of industrial applications – and future manufacturing requirements. “Keep in mind, this system isn’t restricted to automotive assembly plants,” Laurence said. “It is an ideal choice for a wide range of scenarios.” Regardless of industry, the modular, pre-engineered design allows customers to easily add more track sections or change the track configuration to fit a different application. “Historically, buffering conveyors were expendable – each new plant or application required a new system,” Laurence said. “We’ve changed that mentality. We think the KUKA BOLT is the last conveyor you will need.”
Ce site internet utilise des cookies (en savoir plus) afin de vous proposer le meilleur service en ligne. Si vous continuez à utiliser notre site internet, nous n’aurons recours qu’aux cookies techniquement nécessaires. Si vous cliquez sur « OK et découvrir KUKA », vous acceptez en plus l’utilisation de cookies de marketing. En cliquant sur « Paramètres des cookies », vous pouvez sélectionner le type de cookies employé.